New Construction Electrician
Rough-In to Trim-Out, Right the First Time
Complete electrical systems for new homes, from rough-in wiring and panel sizing to smart home pre-wire and final fixture installation. Built right the first time.
New Build Electrical Specialists
Electrical Systems Designed for Your New Home
New construction electrical work in Cheyenne, WY demands more than running wire through open studs. It requires careful planning, precise load calculations, and forward-thinking design that anticipates how your family will use the home for decades to come. Moonlight Electric Solutions provides complete new construction electrical services for builders, homeowners, and general contractors throughout the Cheyenne area, delivering systems that are safe, code-compliant, and ready for the future.
Isaac Garcia, owner and master electrician licensed in both Wyoming and Colorado, brings a level of precision to residential new construction that most electricians simply do not offer. His experience wiring power systems for US federal facilities overseas taught him that every connection matters, every load calculation must be accurate, and every installation must pass inspection without callbacks. That government-grade discipline is exactly what your new home deserves, whether you are building a starter home in south Cheyenne or a custom estate on the outskirts of town.
We work with every major builder in the Cheyenne market and welcome homeowner-managed custom builds. From the moment blueprints are available, our team plans the electrical layout, sizes the service entrance and panel, maps circuit routes, and coordinates with HVAC, plumbing, and framing crews to ensure seamless integration. The goal is a finished home where every outlet, switch, and fixture works exactly as designed on move-in day, with capacity to add future upgrades like EV chargers, solar panels, or home automation without rewiring.
Rough-In Through Trim
We handle every phase of the electrical build from underground service entrance to final fixture hanging and testing.
Smart Home Ready
Pre-wire for smart home systems, structured cabling, and automation during construction when costs are lowest.
Inspector Coordination
We pull permits, schedule inspections, and ensure every phase passes on the first visit to keep your build on schedule.
Our New Construction Services
What We Build Into Every New Home
Service Entrance & Panel Sizing
Proper panel sizing is the foundation of your home’s electrical system. We calculate total load requirements based on square footage, appliance schedules, HVAC demands, and future expansion needs. Most new homes in the Cheyenne area require 200-amp service, though larger homes with multiple HVAC zones, hot tubs, or workshops may need 400-amp. We install the meter base, service entrance cable, main panel, and grounding system that serves as the backbone of your entire electrical installation.
Rough-In Wiring
During the open-stud phase, we install all branch circuit wiring, junction boxes, switch boxes, outlet boxes, and fixture boxes according to the approved electrical plan. We run dedicated circuits for kitchen appliances, bathroom GFCI circuits, laundry circuits, garage circuits, and any specialty circuits specified in the plans. All wiring is secured, labeled, and routed to minimize interference with other trades and maximize accessibility for future maintenance.
Smart Home Pre-Wire & Structured Cabling
The construction phase is the most cost-effective time to install structured wiring for smart home systems. We pre-wire for whole-home audio, security cameras, network cabling (Cat6/Cat6a), and automation control systems. A central wiring closet or structured media panel collects all low-voltage runs for clean, organized connectivity. This investment during construction saves thousands compared to retrofitting these systems after drywall is installed.
Fixture Installation & Trim-Out
After drywall, paint, and flooring are complete, we return for the trim-out phase. We install all light fixtures, ceiling fans, outlets, switches, cover plates, and specialty devices. Every circuit is tested for proper operation, correct polarity, and solid grounding. Dimmer switches, smart switches, and specialty controls are configured and verified. The final result is a complete, functional electrical system ready for your move-in day.
Code Compliance & Future-Proofing
Every new construction project meets current NEC code requirements including arc-fault circuit interrupters in bedrooms and living areas, tamper-resistant receptacles throughout, GFCI protection in wet locations, and proper smoke and carbon monoxide detector wiring. We also install spare conduit runs and extra panel capacity so future upgrades like EV chargers, solar panels, and backup generators can be added without major rework.
Construction Timeline
How We Integrate With Your Build
Pre-Construction Planning
We review blueprints, develop the electrical plan, size the service, and coordinate with your builder on scheduling. This happens before ground is broken so every trade knows where electrical runs will be routed. We identify potential conflicts early and resolve them on paper, not on the job site.
Underground & Service Installation
Before the foundation is backfilled, we install underground conduit and any below-slab electrical work. The service entrance, meter base, and main panel are installed as soon as the structure is framed and weathered in. This gives us power for other trades and establishes the electrical backbone of the home.
Rough-In & Inspection
With walls open, we complete all branch circuit wiring, install boxes, and run low-voltage cabling. We schedule and pass the rough-in inspection before insulation and drywall begin. This is the critical phase where quality and attention to detail matter most, as everything will be hidden behind walls for the life of the home.
Trim, Test & Final Inspection
We install all devices, fixtures, and covers, then test every circuit and system. The final electrical inspection confirms code compliance throughout. We walk you through the completed system, explain your panel layout, and provide documentation you will need for warranty and insurance purposes.
Common Questions
New Construction Electrical FAQs
What size electrical panel does my new home need?01
Most new homes in Cheyenne require a 200-amp service panel, which provides adequate capacity for standard appliances, HVAC systems, and typical household loads. Larger homes exceeding 3,000 square feet, homes with multiple HVAC zones, electric vehicle chargers, hot tubs, workshops, or planned solar installations may need 400-amp service. We perform a detailed load calculation based on your specific home design and future plans to recommend the right panel size from the start.
How early should I hire an electrician for new construction?02
Ideally, we should be involved during the design phase, before permits are pulled. Early involvement allows us to review blueprints for electrical feasibility, identify potential conflicts with other systems, and ensure adequate capacity is designed into the plans. At minimum, we need to be engaged before the foundation pour so underground electrical can be coordinated. The earlier we are involved, the more efficient and cost-effective the installation will be.
Should I pre-wire for smart home technology?03
Absolutely. Pre-wiring during construction is dramatically less expensive than retrofitting after walls are closed. We recommend at minimum running Cat6 network cabling to every room, coax to media locations, and pre-wire for security cameras at key exterior points. If you are considering whole-home audio, automated lighting, or a structured automation system, construction phase is the time to install the wiring. Even if you do not activate these systems immediately, having the infrastructure in place saves thousands when you are ready.
How long does new construction electrical take?04
For a typical 2,000 to 3,000 square foot home, the rough-in phase takes three to five days. Service entrance installation takes one day. Trim-out takes two to three days. These phases are spaced throughout the construction timeline to coordinate with other trades. Total elapsed time from rough-in to final inspection is typically eight to twelve weeks, though our actual on-site days total roughly one to two weeks. We schedule around your builder’s timeline to prevent delays.
Do you work with any builder or just specific ones?05
We work with every builder in the Cheyenne and Northern Colorado market. Whether you are building with a production builder, a custom home builder, or managing the construction yourself as an owner-builder, we integrate with your project team. Isaac has coordinated multi-trade projects ranging from single-family homes to federal government contract facilities, so we adapt to any builder’s processes and communication preferences. We also welcome direct relationships with homeowners building custom homes.
What is included in your new construction electrical quote?06
Our comprehensive quote covers the service entrance and panel, all branch circuit wiring, every outlet and switch specified in the plans, all fixture boxes and junction boxes, dedicated appliance circuits, smoke and CO detector wiring, exterior outlets and lighting circuits, permits, and inspections. Low-voltage wiring for networking, security, and audio is quoted separately if requested. Light fixtures and specialty devices are typically owner-supplied, though we can source them if preferred. Every line item is itemized so you know exactly what you are paying for.
Building a New Home?
Get Your New Construction Electrical Quote
From blueprints to move-in day, Moonlight Electric Solutions builds electrical systems that last. Master-licensed, fully insured, and trusted by Cheyenne builders.
(307) 757-5553 Light Up My ProjectServing Cheyenne, Laramie, Fort Collins & surrounding communities • igarcia@moonlightelectricsolutions.com